Whilst your Velorbis Classic Bicycle is designed to reduce servicing requirements to a minimum, regular maintenance and simple care are essential to keep your bicycle running smoothly.
A clean bicycle not only looks smart, it also tends to be more reliable as any maintenance issues are much easier to spot. Clean your bicycle using a car shampoo (do not use domestic washing-up liquids as they contain salts) and a soft brush or sponge. Take care to keep the leather saddle and/or leather handlebar grips dry. Don’t forget to clean the wheels and tyres - not only will you spot any glass or grit embedded in the tyre, and should a puncture occur, repairing a clean wheel is less of a chore than a grimy one. If you live by the coast, or ride on salted roads in winter, you must clean your bicycle frequently to prevent corrosion.
- Very few parts of your Velorbis Classic Bicycle require lubrication.
- If your bicycle has a fully enclosed chaincase, apply a drop of oil to each link.
- If your bicycle has an exposed chain, a lubricant chan spray, regularly applied (especially after wet weather) will work well. Oil is fine but will attract dirt.
- If cables are stiff to operate, lubricate with WD40 or similar.
- Hubs, pedals and bottom bracket units are sealed for life. Rear hubs (3 and 7 speed) may benefit from grease replacement (see your dealer) every five to ten years.
There are too many variables involved to accurately predict average component life. The best way to stay safe is to regularly maintain your bicycle (or have it serviced professionally) and to listen to your bike as you ride - any creak or squeak should be traced as soon as possible and fixed. If you ride many kilometres you will naturally become more in tune with your bicycle and will be able to identify any unusual noises as soon as they occur. Heavy users will wear out chains, sprockets, bearings etc. at a greater rate than average. No bicycle components last forever - listen to your bike and replace before they wear out completely. If in doubt, get an expert opinion from your local bicycle work shop.
It is important to look after your bicycle and have any required repairs done as soon as possible. What may start off as a minor clicking noise may lead to a broken spoke, which in turn may lead to further broken spokes and a collapsed wheel - possibly causing accident and injury. A worn chain will lead to premature wear on both sprockets and chainrings. Running tyres at low pressures will lead to sidewall failures. A loose crank will quickly damage its taper and will need to be replaced.
Timely attention will save you trouble and expense, as well as keeping your bicycle safe to ride.